|
Features of the SMW-500 model environment protected plastic flour mill:
The SMW-500 model environment protected plastic flour mill series is the rotor plastic flour mill, with the advantages of high yield and small size. After the practice test, this type plastic flour mill can be used for powder processing of Polyethylene (PE), PolyvinylChloride (PVC), Polypropylene (PP), Polypropylene (PP), Polystyrene (PS), PE foamed, SBS, EVA, soft PVC, rubber and other materiels.
This type plastic flour mill using a new type of structure, increased production and overcome the shortcomings of low yield and coarse powder;
High yield, fine milling, energy saving and environmental protection;
Applicable to all kinds of materiel, for example: PVC, PE, PP, ABS, PS, PA, PC and so on;
Easy installation and maintenance, you can open the door of main machine and clean up;
The entire milling process of this flour mill is sealed, and no dust pollution;
The powder size is adjustable (the range is 10-120 mesh), the adjustment is very convenient;
Wind and water circulating cooling systems is adopted by this type plastic flour mill;
Fine knifes which made by wear-resistant steel, has the advantages of high yield and good wear resistance.
Technical parameters of the SMW-500 model environment protected plastic flour mill:
| Model |
SMW-500 |
| Inside diameter of crushing chamber |
￠500mm |
|
Rotor number |
1 group |
| The main rotate speed |
3700rpm |
| The motor power |
37KW |
| Output |
180-280kg/h |
| Granularity |
10-120 mesh |
| The whole weight |
1280kg |
| Overall dimensions |
5900*1450*2900mm | |
